Household Appliances Archivi - CCM Oleo https://www.ccmoleo.com/en/sectors-machine/household-appliances/ Macchine per Prove Dinamiche e Statiche, Attuatori per Alte Velocità, Presse Oleodinamiche Tue, 21 Jun 2022 10:26:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.2 Special Presses https://www.ccmoleo.com/en/machines/special-presses/ Wed, 24 Mar 2021 16:29:08 +0000 https://www.ccmoleo.com/macchine/presse-speciali/ PRESSES FOR PRODUCTS OF FIBERGLASSPress type “GEB” of 1200 kN with heated molds to produce parts of glass fiber PRESSES FOR TISSUES WELDINGPress 1000 kN type “4MT” with heated plate for tissues welding for the production of thermal blankets (electric blanket)

L'articolo Special Presses proviene da CCM Oleo.

]]> PRESSES FOR PRODUCTS OF FIBERGLASS
Press type “GEB” of 1200 kN with heated molds to produce parts of glass fiber

PRESSES FOR TISSUES WELDING
Press 1000 kN type “4MT” with heated plate for tissues welding for the production of thermal blankets (electric blanket)

L'articolo Special Presses proviene da CCM Oleo.

]]> Deep Drawing Presses (PCDE / PCTE) https://www.ccmoleo.com/en/machines/deep-drawing-presses-pcde-pcte/ Thu, 17 Dec 2020 10:38:35 +0000 https://www.ccmoleo.com/macchine/presse-per-imbutitura-pcde-pcte/ Our DEEP DRAWING PRESSES PCDE – PCTE are autonomous and fast. Constituted by: – Structure formed by electrowelded and normalized sheet steel. Structure is embedded with hardened steel guideways for mobile plate sliding. – Mobile plate fully guided on adjustable gibs with slide ways made of synthetic material, at the bottom are provided T-slots for […]

L'articolo Deep Drawing Presses (PCDE / PCTE) proviene da CCM Oleo.

]]> Our DEEP DRAWING PRESSES PCDE – PCTE are autonomous and fast.

Constituted by:

– Structure formed by electrowelded and normalized sheet steel. Structure is embedded with hardened steel guideways for mobile plate sliding.

– Mobile plate fully guided on adjustable gibs with slide ways made of synthetic material, at the bottom are provided T-slots for attaching molds.

– Main cylinder, blank-holder and third action in the PCTE.

– Hydraulic system formed by a variable capacity pump in semi-closed circuit. This system allows to obtain high speed and braking in very short spaces.

Possibility to vary the speed even in the working phase, acting on a potentiometer, without throttling the pipes and thus obtaining a saving of energy.

Possibility to modulate different pressures during the work phase.

Programming of the work cycle is on discretion of the operator.

(Models PCDE-PCTE can be supplied in versions with capacity from 320 kN to 1600 kN)

L'articolo Deep Drawing Presses (PCDE / PCTE) proviene da CCM Oleo.

]]>