Leaf-spring Testing Machines

LEAF-SPRING TESTING MACHINES with nominal load up to 500 kN are characterized by a vertical servo-controlled actuator which presses the leaf and allows the measurements of the free height, camber, deflection by means of a potentiometer and the force exerted by load cells.

The trolleys where the leaf spring is placed are set for detecting the chord and the semi chords and they can be equipped with a transducer to detect the spring eye parallelism. It is possible to install a floating plan on the actuator to detect the planarity of the first leaf of the laminated spring. Inside the base of the machine there are automatic supports allowing the testing of the double layer laminated springs and springs with triple flexibility.

For leaf springs with exceeding height than the standard is possible to perform a Scrag procedure with self-learning to re-enter within the required parameters, which reduces the execution time.

We can supply machinery with robotized loading for production lines.


Sectors of application:

Leaf spring testing machine

Leaf spring test: yield and load are detected. In the first descent of the actuator, the physical measurements of the crossbow are taken and a settling load is impressed. On the second descent, the height of the crossbow is measured under the expected test load.

Do you need more information?


Contact us for more information, we will reply you as soon as possible.

    Nome
    Cognome
    Ragione Sociale
    CAP
    Indirizzo
    Città*
    Telefono
    Email*
    Messaggio*

    INFORMATIVA PRIVACY

    Ai sensi dell'art. 13 del Regolamento UE 679/2016 GDPR

    CCM Oleo

    C.C.M. degli Eredi di Zocchi E. sas di Gallazzi M. & C.
    Via G. Aspesi, 75 Fraz. San Macario
    21017 Samarate VA
    Cod.Fisc. e P.IVA 00842230120

    Contacts


    © CCM Oleo. Powered by Sistemi Ufficio. | Privacy Policy | Cookie Policy